Skip to content
Independent home-inspection guidance. We are not affiliated with the prior occupant of this domain.
Find an inspector

Dishwasher Not Draining: Causes and Step-by-Step Fixes

By InspectandTest Editorial Team Published October 3, 2026 Updated November 12, 2026

We may earn commission from links on this page. Lead-form submissions are forwarded to local inspector partners. How we research and review.

Photo via Unsplash by Mohammad Esmaili

Opening the door at the end of a cycle and finding a pool of gray water in the bottom of the tub is frustrating, but it is also one of the most fixable appliance problems in a kitchen. A dishwasher not draining is usually blocked somewhere along a short path: the filter in the tub, the sump and drain pump, the drain hose, the air gap or high loop, and finally the garbage disposal or sink tailpiece the hose empties into. Most of those points can be checked with a towel, a shallow pan, a flashlight and a screwdriver. This guide walks through the checks in the order that tends to find the problem fastest, explains what pump and check-valve failures look like, covers error codes and odors, and gives general 2026 cost ranges. Those figures vary by brand, region and service company, so treat them as a starting point for quotes rather than firm prices.

Plumbing problem? Talk to a local plumber now.

📞 Call (877) 637-1527

Free, no-obligation quote · Connect with a local pro. Calls may connect you with a partner contractor; we may be compensated for calls.

Why Is My Dishwasher Not Draining?

In most homes the answer is a clog, not a broken part. Food scraps, labels, broken glass, fruit pits and grease collect in the filter or the sump, or the drain hose gets kinked or plugged where it connects under the sink. Less often the drain pump has failed, the check valve is stuck, or the dishwasher was installed without a working air gap or high loop.

The quickest way to narrow it down is to work from the inside of the tub outward:

  1. Filter and sump area inside the tub.
  2. Food debris or objects around the spray arm and drain cover.
  3. Drain hose behind the machine and under the sink, checked for kinks or crushing.
  4. Air gap on the sink deck or high loop under the counter.
  5. Garbage disposal connection, including the knockout plug on newly installed disposals.
  6. The sink drain itself, including the tailpiece and P-trap.
  7. Drain pump, check valve and control issues.

Before any hands-on work, turn the dishwasher off at the control panel and switch off the circuit breaker or unplug it under the sink. Many machines are hardwired, so the breaker is the safer option. Bail out standing water with a cup and soak up the rest with towels so the bottom of the tub is visible.

Step-by-Step Checks, Easiest First

1. Clean the Filter

Most dishwashers sold in the last decade use a manual filter rather than a self-cleaning grinder. It usually sits in the floor of the tub under the lower spray arm and twists out with a quarter turn. A coarse cylindrical filter often lifts out with a flat fine-mesh screen under it. When the mesh is coated with grease and food sludge, water drains so slowly that the cycle ends before the tub is empty.

Rinse the filter under warm running water and scrub it with a soft brush and a little dish soap. Avoid wire brushes, which can tear the mesh. Many owner’s manuals suggest cleaning the filter every few weeks to every few months depending on how often the machine runs and how much food goes in with the dishes. ENERGY STAR notes that newer certified models use improved water filtration among other design changes, which is one reason manual filters have become standard.

2. Clear Food Debris and Foreign Objects

With the filter out, shine a flashlight into the sump opening. Look for bits of glass, bone, toothpicks, plastic wrap, seeds and labels from jars. Pick them out with tongs or gloved fingers; broken glass is common after a glass chips in the rack. If the machine has a drain cover or impeller cover held by screws, remove it and check the pump inlet for anything wedged against the impeller.

Also spin the lower spray arm by hand. If it does not turn freely, debris may be caught underneath and blocking the drain path at the same time.

3. Inspect the Drain Hose for Kinks

The drain hose runs from the pump at the bottom of the dishwasher, through the cabinet wall, to the disposal or sink tailpiece. Pushing a dishwasher back into its opening after service, or stacking cleaning products in the sink base, can kink or crush it. Open the sink cabinet and trace the hose as far as possible. A sharp bend, a flattened section or a loop pinched behind a bin is a likely culprit.

If the hose looks fine from below, disconnect it at the sink end with a pan underneath. Blowing through it or running water through it from a faucet sprayer shows whether it is clear. Ribbed hoses can pack with grease over time; a hose that will not clear is inexpensive to replace.

4. Check the Air Gap or High Loop

Plumbing codes in many areas require a way to keep dirty sink water from siphoning back into the dishwasher. That is either an air gap, which is the small chrome or plastic cylinder on the sink deck or countertop, or a high loop, where the drain hose is fastened up near the underside of the countertop before it drops to the drain connection. Local rules on which method is acceptable vary, so check with the building department before changing an installation.

Air gaps clog easily. Pull or twist off the decorative cap, unscrew the inner cover and clear food packed inside with a small brush or a bent pipe cleaner. If water spurts out of the air gap during the drain cycle, the hose from the air gap to the disposal or tailpiece is probably blocked below it.

When there is no air gap, look for the high loop. A drain hose that sags along the cabinet floor with no loop can let sink water flow back into the tub, which sometimes looks like a drainage failure even when the pump works.

5. Remove the Disposal Knockout Plug on a New Install

This one catches a lot of homeowners. If a new garbage disposal was just installed and the dishwasher stopped draining the same day, the knockout plug inside the disposal’s dishwasher inlet was probably never removed. New disposals ship with a solid plastic or metal disc sealing that inlet for homes without a dishwasher.

With the power off and the dishwasher hose disconnected from the disposal inlet, tap a screwdriver through the plug with a hammer, then reach in through the sink opening and remove the loose disc so it does not rattle around the grinding chamber. Our garbage disposal repair guide covers jams, reset buttons and other disposal issues that can also back up a dishwasher.

Even an older disposal can cause drain trouble. If the disposal is packed with food, the dishwasher has nowhere to pump. Run the disposal with cold water for a minute, then run a short dishwasher rinse or drain cycle to see if the tub empties.

6. Look for a Sink Drain Clog

The dishwasher empties into the same drain as the kitchen sink. If the sink itself drains slowly or backs up into the other bowl, the dishwasher is only a symptom. Clear the sink drain first. A plunger on the sink (with the dishwasher hose clamped or the air gap covered) often works on a fresh clog. Grease buildup further down the line may need a hand auger. See the clogged drain guide for methods that are gentle on older pipes, and the P-trap guide for removing and cleaning the trap under a two-bowl sink.

Avoid pouring chemical drain openers into a sink connected to a dishwasher.

Drain Pump and Check Valve Problems

If the filter, hose, air gap, disposal and sink drain are all clear, the problem may be mechanical. Two parts are usually involved.

Drain Pump

The drain pump is a small motor and impeller that pushes water out through the hose. Listen during the drain portion of a cycle. A steady hum with no water movement may mean the impeller is jammed by debris or the motor has seized. Silence where the pump should run can point to a failed motor, a wiring issue or a control board that is not sending power. A grinding or rattling sound usually means something hard is caught in the impeller.

On many models the pump can be reached by removing the lower kick panel, and sometimes by laying the machine on its back after it is pulled out. Testing a pump for continuity with a multimeter is common advice, but it involves electrical work around water. Homeowners uncomfortable with that should leave the testing to a technician.

Check Valve

A check valve, often a small rubber flap or ball in the pump outlet or the drain hose connection, keeps drained water from flowing back into the tub. If it sticks closed, water cannot leave. If it sticks open, dirty water can drift back in after the cycle, leaving a small amount of water in the bottom. Some models need a little water in the sump to keep seals moist, so a shallow puddle below the filter is not always a fault. A puddle that covers the tub floor is.

Error Codes, Standing Water and Odors

Error Codes

Many dishwashers display a code when the drain phase takes too long. The exact codes differ by brand and even by model year, so look up the code in the owner’s manual or on the manufacturer’s support site using the model number from the label on the tub rim or door edge. Drain-related codes usually point to the same checks above: clogged filter, blocked hose or air gap, failed pump or a problem with the drain sensor. A code alone does not prove a part has failed, so work through the inexpensive checks before ordering parts.

Many models also have a reset routine, often holding a button for a few seconds or cutting power at the breaker for a minute. Resetting can clear a code after the clog is fixed, but it will not fix the clog itself.

Standing Water and Smell

Water that sits in the tub for days turns sour quickly. The smell usually comes from decomposing food in the filter, the sump, the door gasket folds and the drain hose. Once the drain is working again, clean the filter, wipe the gasket and the bottom edge of the door, and run an empty hot cycle with a dishwasher cleaner or a cup of white vinegar placed upright on the top rack, if the manufacturer allows it.

Dark spots on the gasket, under the spray arm or in the utensil basket are sometimes mold. The black mold in dishwasher guide explains how to tell mold from mineral or food staining and how to clean it. EPA advises that the key to mold control is moisture control, and that water-damaged areas should be dried within 24 to 48 hours to help prevent mold growth. That applies to the cabinet floor and subfloor too if the backup ever spilled out of the machine.

Drainage Problems vs Leaks

A machine that does not drain and a machine that leaks are different problems, but they can overlap. An overfull tub, or a backed-up air gap spilling onto the counter, can put water where it does not belong. A cracked drain hose can also leak under the sink while the tub still holds water. If water is showing up on the floor or in the sink base, the dishwasher leaking guide walks through sources from the door gasket to the inlet valve. EPA WaterSense notes that leak detection and flow monitoring devices can alert homeowners to irregular water use and help reduce damage from leaks, which makes an inexpensive sensor under the sink a sensible add-on.

When to Call an Appliance Technician

A homeowner can handle most of the checks above in under an hour. A technician makes sense when:

  • The filter, hose, air gap, disposal and sink drain are all clear but the tub still holds water.
  • The pump hums, grinds or stays silent during the drain phase.
  • The machine shows repeated drain codes after a reset.
  • Water reaches the floor, or the cabinet floor is swollen or soft.
  • Electrical work is needed, or the machine is hardwired with no accessible shutoff.
  • The dishwasher is under warranty, since self-repair can sometimes affect coverage.

When the drain line itself is clogged deep in the wall, a plumber is usually the better call. A technician can confirm the appliance is working, while a plumber has the tools to clear the branch line.

What Dishwasher Drain Repairs Cost

Prices below are rough 2026 ranges and vary by region, brand and company. Front Range service calls in Denver, Colorado Springs and the Boulder area often fall near the middle or upper end of national ranges.

  • DIY filter cleaning, debris removal, knockout plug: typically free beyond basic tools.
  • New drain hose: often around $15 to $40 for the part.
  • Air gap replacement: commonly $20 to $50 for parts, more if a plumber installs it.
  • Service call or diagnostic fee: frequently in the range of $80 to $150, sometimes applied to the repair.
  • Drain pump replacement, installed: often roughly $150 to $400 depending on brand and labor.
  • Control board replacement: can run from about $200 to $500 or more installed.
  • Plumber to clear a kitchen branch drain: commonly $150 to $400 depending on access and method.

When a quote approaches half the cost of a comparable new dishwasher, and the machine is more than about 10 years old, many homeowners replace it instead. ENERGY STAR estimates a standard-size certified dishwasher costs about $50 a year to run, which is worth factoring into that decision.

What Home Inspectors Check

Buyers sometimes discover a draining problem only after closing. Under the ASHI Standard of Practice, inspectors operate installed dishwashers and food waste grinders using normal controls to activate their primary function, and they inspect interior drain, waste and vent systems, including fixtures. That means an inspector will usually run the dishwasher, check the sink base for leaks and staining, and note a missing air gap or high loop. Inspectors are generally not required to disassemble the machine or test every cycle, so an intermittent drain problem can still slip through. The guide to hiring a home inspector explains what a standard inspection covers and when a specialist makes sense.

Preventing Future Drain Problems

  • Scrape plates into the trash; rinsing is optional with most modern detergents, but bones, pits and labels should never go in.
  • Clean the filter on the schedule in the owner’s manual, more often for heavy use.
  • Run the disposal before starting the dishwasher so the shared drain is clear.
  • Keep the sink base organized so the drain hose is not crushed.
  • Use only automatic dishwasher detergent; hand soap can create suds that confuse sensors and slow draining.

A few minutes of maintenance every month usually prevents the bigger repair bill and the sour smell that comes with standing water.

More Questions About a Dishwasher Not Draining

How long should standing water sit before calling a repair?

Standing water in a dishwasher should not be left for more than a day or two before troubleshooting, and a technician is worth calling if the easy checks do not clear it within that time. A small amount of water in the sump below the filter is normal, but water above the filter means something is blocking drainage.

Stagnant water starts to smell and can grow bacteria quickly. Bail it out with a cup and towel, clean the filter, check the hose and air gap, and run a drain-only or cancel cycle before scheduling service.

Can I use a drain cleaner in a dishwasher?

No, chemical drain cleaners should not be poured into a dishwasher. Caustic products can damage plastic parts, pump seals, and rubber gaskets, and residue may end up on dishes in later cycles. Manufacturers generally warn against them.

Instead, remove and clean the filter, clear debris from the sump by hand, and flush the drain hose with hot water. If the clog is in the kitchen sink drain or disposal, address it there with a plunger or a hand auger. A plumber can clear a stubborn branch drain mechanically without risking the appliance.

Why does my dishwasher drain into the sink?

Water backing into the sink from a dishwasher usually means the sink drain is partly clogged or the air gap is blocked. The dishwasher pumps water through the air gap or high loop into the disposal or sink tailpiece, and when that path is restricted, water takes the easiest route out, often the sink basin.

Clean the air gap cap, run the disposal to clear food, and test whether the sink itself drains slowly. A slow sink points to a kitchen drain clog that a plunger, hand auger, or plumber can clear.

Does a dishwasher need a high loop or an air gap?

A dishwasher drain needs some form of backflow protection, either an air gap or a high loop, depending on the local plumbing code. Some jurisdictions require a countertop air gap, while many others accept a high loop, where the drain hose is fastened up under the countertop before dropping to the drain connection.

Both keep dirty sink water from siphoning back into the dishwasher. A missing loop can cause odors, standing water, and dirty dishes. Check with the local building department if unsure which method is required.

Can a bad door latch stop a dishwasher from draining?

Yes, a faulty door latch or door switch can stop a dishwasher from draining because most machines will not run their cycle, including the drain phase, unless the control senses the door is closed and locked. The cycle may stall mid-wash with water still in the tub.

Signs include a cycle that will not start, lights that flicker when the door is pressed, or a machine that pauses unpredictably. A technician can test the switch with a meter. Door latch replacement is typically a moderate repair, usually far cheaper than a pump or control board.

References

Frequently asked questions

Why is there water in the bottom of my dishwasher?

The most common causes are a clogged filter, food debris in the sump, a kinked drain hose or a blocked air gap. A shallow puddle below the filter can be normal on some models, but water covering the tub floor usually means a drainage problem.

Can a garbage disposal stop a dishwasher from draining?

Yes. A disposal packed with food leaves the dishwasher nowhere to pump, and a newly installed disposal may still have its knockout plug in the dishwasher inlet. Run the disposal first, and if it is new, remove the plug with the power off.

How do I unclog a dishwasher drain hose?

Turn off power, disconnect the hose at the sink end over a pan, and flush it with water or blow through it to check for a blockage. Straighten any kinks. A hose packed with grease or damaged is usually cheaper to replace than to clear.

Is it worth repairing a dishwasher that will not drain?

Clogs are usually free or cheap to fix. A drain pump replacement often costs roughly $150 to $400 installed. If the quote nears half the price of a new machine and the dishwasher is over about 10 years old, replacement is often the better value.

Will a home inspector check if the dishwasher drains?

Under the ASHI Standard of Practice, inspectors operate installed dishwashers using normal controls. They usually check the sink base and note a missing air gap or high loop, but they do not disassemble the machine, so intermittent problems can be missed.

Is it safe to use a dishwasher with standing water?

Running a dishwasher with standing water is generally not recommended because dirty water can redeposit on dishes and the drain pump may overheat if it is blocked. Clear the water and fix the clog first, then run an empty rinse cycle to confirm the dishwasher drains before washing a full load.

Why does my dishwasher drain slowly after a garbage disposal clog?

A dishwasher that drains slowly after a disposal clog usually still has food packed in the disposal inlet or the shared drain line. Run the disposal with cold water, clear the dishwasher inlet port on the disposal, and check that the sink drains freely before testing the dishwasher again.

Can hard water cause dishwasher drain problems?

Hard water can contribute to dishwasher drain problems over time because mineral scale builds up in the filter, sump, and check valve, narrowing passages and making debris stick. Regular filter cleaning, a monthly descaling cycle, and rinse aid help reduce buildup, especially in homes without a water softener.

Buying a home and want the kitchen plumbing and appliances looked at closely? Reach out to our team and we can match you with a Front Range inspector who runs the dishwasher and checks under the sink for hidden water.