Blown-In Insulation Cost: Cellulose vs Fiberglass Prices
Adding loose-fill insulation to an attic is one of the most common energy upgrades homeowners make, and one of the easier ones to budget for. Contractors can blow a thick, even blanket of cellulose or fiberglass across an attic floor in a few hours, and many Front Range homes built before the 2000s still have far less than current recommendations. Quotes can vary widely, though, and the price per square foot is only part of the bill. This guide breaks down typical blown in insulation cost ranges, compares cellulose and fiberglass, explains which add-ons push the total up, and walks through DIY machine rental, rebates and the air sealing step that should come first. Prices are general estimates for 2026 and vary by contractor, region and attic conditions; get several written quotes before committing.
Part of our Crawl Space & Attic Guide guide — start there for the full picture →
How Much Does Blown-In Insulation Cost?
For a professionally installed attic top-up, many homeowners see prices somewhere around $1 to $2.50 per square foot of attic floor, with the total for a typical 1,000 to 1,500 square foot attic often landing in the range of roughly $1,500 to $4,000. Smaller jobs may carry a minimum charge. Projects that include removing old insulation, extensive air sealing, new baffles or difficult access can push the total well above that range.
Those figures are broad on purpose. The biggest variables are how much insulation is already there, what R-value you are targeting, and what has to happen before any new material goes in. Here is a rough sense of how the pieces add up:
| Item | Typical range (estimate) | Notes |
|---|---|---|
| Blown-in top-up, existing insulation in place | About $1 to $2 per sq ft | Depends on depth added |
| Blown-in to full depth over bare attic floor | About $1.50 to $2.50+ per sq ft | More material, more labor |
| Attic air sealing | Often several hundred to $2,000+ | Varies with number of penetrations |
| Removing old insulation | Often $1 to $2.50+ per sq ft | Higher if contaminated by rodents |
| Rafter baffles at eaves | Often a few dollars per bay installed | Needed to keep soffit vents open |
| Insulated attic hatch cover | Often $50 to $300 | DIY kits available |
Treat these as starting points for a conversation with contractors, not quotes. Labor rates along the Denver and Colorado Springs corridors, fuel surcharges for mountain communities and seasonal demand all shift pricing.
Cellulose vs Blown Fiberglass
Both materials are blown through a hose into the attic, and both can reach the same R-value. They differ in density, behavior over time and how they handle moisture and air. Material prices are often in a similar range, so the choice usually comes down to performance preferences and what a contractor typically installs.
Blown cellulose
Cellulose is made mostly from recycled paper and is treated with fire retardants, commonly borate compounds, that also help discourage insects and mold. It is denser than loose-fill fiberglass and typically delivers around R-3.2 to R-3.8 per inch, so it reaches a given R-value with fewer inches.
- Air resistance: its density slows air movement through the layer better than loose fiberglass, which can help in leaky attics.
- Settling: cellulose settles over time. Reputable installers blow it deeper than the target to compensate and should list both installed and settled thickness on the bag coverage chart.
- Moisture: cellulose absorbs water. A roof leak or bath fan dumping humid air into the attic can soak it, compress it and promote mold on nearby wood.
- Weight: it is heavier, which is rarely a problem for standard drywall ceilings at normal depths but worth considering on older plaster or lightly framed ceilings.
- Dust: installation is dusty, and fine particles can find their way through unsealed openings into the living space.
Blown fiberglass
Loose-fill fiberglass is spun glass fiber in a fluffy, lightweight form. It typically rates around R-2.2 to R-2.9 per inch, so it takes more depth to hit the same R-value.
- Settling: it settles very little compared with cellulose.
- Moisture: glass fibers do not absorb water the way paper does, and the material tends to dry out faster. It still loses performance while wet and does nothing to stop a leak from reaching the ceiling.
- Fire: glass fiber is naturally noncombustible, though paper or foil facings on other fiberglass products are not.
- Air movement: loose fiberglass is relatively air permeable. In very cold weather, convection within the layer can reduce performance somewhat, which is another argument for air sealing first and blowing to a generous depth.
- Weight: it is light, which makes deep installations easy on ceiling framing.
Which is better for Colorado attics?
Both work well when installed to the right depth over a sealed attic floor. Cellulose’s density is an advantage in drafty attics; fiberglass’s low weight and minimal settling suit very deep installations. The dry Front Range climate is forgiving for either one, provided the attic has no roof leaks and bath fans vent outdoors. A contractor who installs both regularly can recommend one based on the specific attic. For a broader comparison of insulation materials and how each reaches its rated performance, see our insulation R-value guide.
What Drives the Price Up or Down
Two attics of the same size can produce very different quotes. These are the factors that usually explain the difference.
Target depth and R-value
More R-value means more bags and more time. ENERGY STAR’s retrofit recommendations for climate zone 5, which covers most of the Front Range, suggest adding about R-60 to an uninsulated attic floor or about R-49 where 3 to 4 inches already exist. Topping up a partly insulated attic therefore costs less than starting from bare drywall. Contractors usually quote by target R-value, so make sure every bid uses the same number. Our attic insulation guide explains how target levels translate to depth.
Air sealing first
Air sealing the attic floor is often the single most valuable part of the job, and the one most often skipped on low bids. Gaps around top plates, plumbing vents, wiring holes, recessed lights, chimneys and the attic hatch let warm, moist indoor air stream into the attic. Insulation piled on top slows conduction but does little to stop that airflow. ENERGY STAR treats sealing and insulating as a combined project for that reason. Sealing adds cost up front, but it is far easier to do before new insulation buries the leaks. Ask whether a bid includes it, what materials will be used, and whether the contractor will perform blower door testing before and after. A home energy audit can pinpoint where those leaks are.
Removing old insulation
Most of the time, new loose-fill can go right on top of existing insulation. Removal makes sense when the old material is wet, moldy, contaminated with rodent waste, or must come out to allow air sealing. Removal typically involves a large vacuum truck and can add significantly to the total, plus disposal costs.
Rodents and pests
Signs of mice, rats or other animals change the scope. Contaminated insulation is usually removed, entry points sealed, and the attic sanitized before new insulation goes in. That work may require a pest-control company in addition to the insulation contractor.
Vermiculite and asbestos concerns
Some older homes have vermiculite in the attic: a loose, pebble-like material, usually gray-brown or silver-gold. EPA advises homeowners to assume vermiculite insulation may be contaminated with asbestos and to avoid disturbing it, or to use a trained professional if it needs to be removed. Do not blow new insulation over it, rake it, or let a contractor work in the attic until the situation has been evaluated. Our guide to asbestos in blown-in insulation explains what to look for and the safer options. Professional abatement can add substantially to the cost of an attic project.
Baffles and ventilation
Deep insulation can bury soffit vents at the eaves, cutting off the intake air that keeps an attic cool and dry. Rafter baffles (also called vent chutes) hold back the insulation and keep an air channel open from the soffit into the attic. Many attics need them added before a top-up. Our attic ventilation guide explains how intake and exhaust vents work together and what happens when the balance is off, including the conditions that contribute to ice dams.
Access and attic layout
A walk-up attic with plenty of headroom is fast to insulate. A low-slope roof with a small hatch in a closet, multiple separate attic spaces, or areas only reachable by crawling across joists takes longer. Some contractors add charges for creating a new access opening or building a dam around the hatch to hold insulation back.
Other prep items
- Recessed lights: older fixtures not rated for insulation contact (IC-rated) need covers, clearance or replacement.
- Bath and kitchen fans: fans venting into the attic should be ducted to the exterior before new insulation goes down.
- Chimneys and flues: combustible insulation must be kept away from hot flues, typically with sheet-metal dams, according to code and manufacturer clearances.
- Knob-and-tube wiring: active knob-and-tube wiring may need evaluation by an electrician before it is buried in insulation.
DIY Machine Rental vs Hiring a Pro
Blowing loose-fill into an open attic is one of the more approachable DIY insulation projects. Many home centers loan or rent a blowing machine, sometimes free with the purchase of a minimum number of bags, so the main cost is the material itself. A DIY job can cost a fraction of a professional quote.
The trade-offs are real, though:
- It is a two-person job. One person feeds bags into the hopper while the other works the hose in the attic.
- Even coverage takes practice. Professionals use depth markers (attic rulers) stapled to joists and adjust the machine settings to reach the coverage on the bag chart. DIY jobs often end up deep near the hatch and thin at the eaves.
- Prep work is the hard part. Air sealing, baffles, hatch dams and fixture covers are tedious, cramped and easy to skip.
- Safety. Attics are hot in summer, dusty, and full of nails and wiring. Step only on joists, wear a respirator, eye protection and long sleeves, and never step between joists onto the drywall.
- Rebates may require a contractor. Some utility programs only pay for work done by participating contractors or verified by testing.
DIY usually makes sense for a straightforward top-up over a clean, accessible attic. A pro is usually the better choice for large or awkward attics, when air sealing and baffles are needed, or when there are any contamination concerns.
Rebates, Incentives and Getting Quotes
Utility companies and local programs in Colorado have offered rebates for attic insulation and air sealing, and programs change frequently. Eligibility may depend on your utility, the starting and finished R-value, whether air sealing is included, and whether a participating contractor does the work. Check your gas or electric utility’s current offerings before you sign a contract. The ENERGY STAR rebate finder lets you search for available offers by ZIP code. Federal tax credits for insulation have also existed in recent years; confirm current eligibility with a tax professional, since rules and expiration dates change.
When collecting quotes, ask each contractor to specify:
- The material (cellulose or fiberglass) and brand.
- The target R-value and the installed and settled depth.
- Exactly what air sealing will be done, and with what materials.
- Whether baffles, a hatch dam, an insulated hatch cover and fixture covers are included.
- Whether blower door testing is part of the job.
- How they will handle vermiculite, rodent contamination or wet insulation if found.
- Whether they will leave a signed insulation certificate or receipt showing R-value and depth, which helps with rebates and future home sales.
Comparing bids line by line is the best defense against a cheap quote that skips the prep work. The parent insulation hub on our site covers the rest of the building envelope, from crawl spaces to rim joists, if you plan to tackle more than the attic.
Example Scenarios: How Quotes Change
The same attic can generate very different numbers depending on what the contractor finds. These simplified scenarios show how the scope, not just the square footage, shapes a bid. They are illustrations, not price quotes.
Scenario 1: Simple top-up
A 1990s ranch home in the Denver suburbs has about 6 inches of loose fiberglass, a pull-down attic ladder, soffit vents that are already baffled, and bath fans ducted outdoors. The job is mostly material and a few hours of labor. This is the type of project that tends to fall at the low end of per-square-foot pricing, and it is also a reasonable DIY candidate.
Scenario 2: Seal, baffle and fill
A 1970s two-story home has 3 to 4 inches of settled insulation, no baffles, unsealed plumbing and wiring penetrations, and a bath fan dumping into the attic. The contractor moves insulation aside to seal top plates and penetrations, reroutes the fan duct, installs baffles at every rafter bay and then blows to full depth. Labor rises considerably, but so does the comfort payoff, because the air leaks are fixed rather than buried.
Scenario 3: Remove and replace
An older home shows evidence of mice throughout the attic, with droppings and nesting in the insulation. The old material is vacuumed out, entry points are sealed, the attic is cleaned and sanitized, and then air sealing and new insulation follow. Removal, disposal and cleanup can make this a multiple of the cost of a simple top-up. If the attic had contained vermiculite instead, the project would first need evaluation by a trained asbestos professional, which changes both the cost and the timeline.
When two bids look far apart, check whether they describe different scenarios. A low bid that treats a Scenario 2 attic like Scenario 1 is not really cheaper.
Is Blown-In Insulation Worth the Cost?
For many older homes, yes. Attic insulation combined with air sealing is often cited as one of the more cost-effective efficiency improvements available. ENERGY STAR estimates that sealing and insulating can save homeowners around 15% on heating and cooling costs on a national average basis, with results varying by house and climate. Beyond bills, homeowners frequently notice fewer drafts, more even temperatures between floors and less summer heat radiating from upstairs ceilings.
The payoff is smallest when the attic already has a deep, even layer. If you can see the tops of the ceiling joists, or the existing layer is only a few inches deep, a top-up is usually worth pricing out.
More Questions About Blown-In Insulation
How long does it take to install blown-in attic insulation?
Blowing insulation into a typical attic usually takes a few hours to one day for a professional crew, while a full job with air sealing, baffles and old-insulation removal can take two or three days. The blowing itself is fast; preparation takes most of the time. Wall dense-packing in an existing home takes longer because each stud bay is drilled, filled and patched. DIY installs with a rental machine commonly take a full day for two people, including bag loading, setup and cleanup.
Is blown-in attic insulation worth the cost?
Blown-in attic insulation is usually worth the cost when the existing attic is under-insulated, because the attic is one of the largest sources of heat loss and gain in most homes. Payback often falls within several years, depending on energy prices, climate, the starting depth and whether air sealing is done first. Homes that already have deep, even insulation see smaller returns from adding more. Comfort improvements, such as fewer cold rooms and less ice damming, are a benefit that energy bills alone do not capture.
How does crawl space insulation cost compare with blown-in attic insulation?
Crawl space insulation typically costs more per square foot than blown-in attic insulation, because it usually involves rigid foam board or spray foam on foundation walls, a vapor barrier, and sometimes full encapsulation rather than simply blowing loose fill. Industry estimates for crawl space work range widely, from a few dollars per square foot for basic wall insulation to much higher for sealed and encapsulated systems. Fiberglass batts between floor joists are cheaper but often sag or absorb moisture, so many contractors avoid them in damp crawl spaces.
How much does blown-in wall insulation cost in an existing home?
Blown-in insulation for existing walls typically costs more per square foot than attic insulation, because installers drill holes in each stud cavity from inside or outside, dense-pack cellulose or fiberglass, then plug and patch the holes. Industry estimates commonly place wall jobs at several dollars per square foot of wall area. Siding type, wall height, fire blocking inside the cavities, and old knob-and-tube wiring all affect price and feasibility. Knob-and-tube wiring should be evaluated by an electrician before any insulation is added around it.
References
- Recommended Home Insulation R-Values — ENERGY STAR
- Seal and Insulate with ENERGY STAR — ENERGY STAR
- Methodology for Estimated Energy Savings from Sealing and Insulating — ENERGY STAR
- ENERGY STAR Rebate Finder — ENERGY STAR
- Protect Your Family from Asbestos-Contaminated Vermiculite Insulation — U.S. Environmental Protection Agency
Frequently asked questions
How much does blown-in insulation cost for a typical attic?
Many homeowners see roughly $1 to $2.50 per square foot installed, or about $1,500 to $4,000 for a typical 1,000 to 1,500 square foot attic. Air sealing, removing old insulation, baffles and difficult access can raise the total. Get several written quotes using the same target R-value.
Is cellulose or fiberglass better for blown-in insulation?
Both can reach the same R-value. Cellulose is denser, resists air movement better and has a higher R-value per inch, but it settles and absorbs water. Fiberglass is lighter, settles little and does not absorb moisture, but needs more depth.
Can new blown-in insulation go over old insulation?
Usually, yes, as long as the existing material is dry, clean and not vermiculite. Air sealing should happen first, which sometimes means moving the old insulation aside. Wet, moldy or rodent-contaminated insulation is typically removed.
Can I blow in attic insulation myself?
Many home centers loan or rent blowing machines, and a top-up over a clean, accessible attic is a common two-person DIY project. Air sealing, baffles and even coverage are the hard parts. Some rebates require a participating contractor.
What should I do if my attic has vermiculite?
EPA advises assuming vermiculite insulation may contain asbestos and leaving it undisturbed. Do not add insulation over it or work in the attic until a trained professional has evaluated it.
How long does blown-in insulation last?
Blown-in insulation can last for decades when it stays dry and undisturbed. Fiberglass does not decay, and cellulose holds up well unless it gets wet. Roof leaks, rodent activity and foot traffic in the attic are the most common reasons blown-in insulation needs to be topped up or replaced.
Does blown-in insulation need replacing after a roof leak?
Blown-in insulation that gets soaked by a roof leak often needs replacing in the wet area, because wet cellulose mats down and can grow mold, and wet fiberglass loses loft. Small, quickly dried spots can sometimes be fluffed and left. Fix the roof first, then check for staining, odor or mold.
Can you walk in an attic with blown-in insulation?
Walking in an attic with blown-in insulation is possible on the joists, but it compresses insulation and risks stepping through the ceiling drywall. Installing a raised walkway or plywood boards on top of raised supports before insulation is blown keeps access paths without crushing coverage.
Want to know whether your attic needs a top-up, air sealing or something more serious before you collect bids? Get in touch and we can connect you with a Front Range inspector who can check insulation depth, ventilation and signs of moisture or pests.