Schneider Labs Asbestos PLM Kit

The SLGi (Schneider Labs) one-pack asbestos kit includes sampling tools, instructions, a prepaid return shipping label and laboratory analysis of one sample. The lab runs polarized light microscopy under EPA Method 600/R-93 and promises results within five business days of the kit arriving. It is a good match for a homeowner who wants one material checked and values a documented method. What sets it apart is transparency: the listing names the exact EPA test method and spells out both the transit window and the lab time, so you can estimate when a result will land.

Specifications

Specification	Details
Part number	Kit1
Test type	Mail-in bulk sample, PLM lab analysis
Method named	EPA Method 600/R-93
Samples covered	One
In the box	Sampling tools, instructions, prepaid return label
Lab turnaround	Five business days after arrival
Transit time	One to five business days to reach the lab
Package size	About 6.25 x 4.25 x 1.75 in

SLGi Kit1 — one-sample PLM kit, EPA Method 600/R-93, prepaid ground return, results five business days after arrival

How It Compares

One of Only Three Listings Here That Names Its EPA Test Method

All ten similar listings are asbestos kits. Only two of them name the specific EPA method used for analysis, and both are SLGi siblings of this kit: a faster three-day one-pack and a three-day two-pack. Three of the four PRO-LAB listings describe “EPA-approved lab methods” without naming one, while Seeml Labs and Asbestos-Sampling.com point to NVLAP accreditation instead. For anyone who wants a report that states the method on paper, the SLGi family is the clearest on the shelf.

The trade-off is speed. Five business days in the lab is slower than SLGi’s own three-day version, Seeml’s two to three days and Asbestos-Sampling.com’s 72 hours, though faster on paper than the roughly one week PRO-LAB quotes. Add one to five days of ground transit and a realistic total is one to two weeks from mailing. If you are not in a rush, the five-day version is the patient choice; if you are, step up to the three-day SLGi kit.

The listing does not name an accreditation body or say whether a mask or gloves are included.

Who It’s For — and Who Should Skip It

This kit fits a homeowner checking a single material, such as basement pipe wrap or old sheet flooring, who wants clear documentation of how the sample was analyzed and does not mind waiting.

Skip it if you have several materials; SLGi’s two-pack or a four-sample kit makes more sense. Skip it if a closing or contractor start date is close, and skip DIY sampling entirely when the material is damaged, spread over a large area, or part of a sale disclosure where a licensed inspector’s report carries more weight.

Using It at Home

In older Denver, Boulder and Colorado Springs homes, common suspects include boiler and pipe insulation, vermiculite in attics, vinyl sheet flooring and its backing, and duct wrap. Choose the material you intend to disturb.

• Stop airflow through the area by switching off the furnace.
• Wet the material, wear a respirator and gloves, and take a piece small enough to fit the container.
• Seal and label the sample, cover the sampled spot, and clean up with a damp cloth.
• Note the mailing date so you can track the stated transit and lab window.

A positive result means pausing the project and getting abatement advice. For help deciding what to sample, or to book a professional inspection, contact us.

Related Guides

• Best asbestos test kits compared
• Asbestos pipe insulation
• How asbestos testing works
• Asbestos in sheet materials

As an Amazon Associate we earn from qualifying purchases. Product details come from the current Amazon listing; we have not lab-tested this unit, and prices and availability change.