Southwire 40022S GFCI Receptacle Tester
The Southwire GFCI receptacle tester (listed under model 40022S) is a compact plug-in tester with indicator lights and a push button that trips GFCI outlets.
The Southwire GFCI receptacle tester (listed under model 40022S) is a compact plug-in tester with indicator lights and a push button that trips GFCI outlets. It is meant for homeowners, renovators and inspectors who want a basic, pocketable check of outlet wiring and ground-fault protection without paying for screens or extra features. Its appeal is simplicity: seven test functions in a small black housing, with nothing to set up and nothing to read beyond a light pattern.
Specifications
| Specification | Details |
|---|---|
| Model | Southwire 40022S |
| Type | Plug-in receptacle tester with GFCI test button |
| Test functions | Seven, per the listing |
| Readout | Indicator light pattern; no display mentioned |
| Size and weight | About 3.6 x 1.7 x 1 inches; roughly 0.12 lb |
| Voltage rating and trip current | Not stated in listing |
| Warranty | Not stated in listing |
Southwire 40022S — compact plug-in GFCI and outlet wiring tester with push-button trip and seven test functions.
How It Compares
A no-screen, single-purpose tester competing with just three similar standalone units on the shelf
Of the 13 similar listings compared here, most are either LCD testers or multi-tool kits. Six listings advertise an LCD or display, including the Klein RT250 and several KAIWEETS products, and seven include a non-contact voltage pen or similar extra. Only three are standalone plug-in testers without a screen, like this Southwire: the Klein RT210, the Gardner Bender GFI-3501 and the Fluke ST120+.
Against those three, the Southwire listing is the least detailed. The GFI-3501 lists every fault it reports, including open neutral, open hot and reversed polarity, and states that it trips between 6 and 9 mA. The RT210 claims a 6.6-foot drop rating and an operating temperature range. The Fluke ST120+ adds an audible beeper that helps when you are flipping breakers to find a circuit. The Southwire listing names seven test modes but does not spell out which conditions they cover, its voltage rating, or its trip current.
Southwire’s bullet points lean on brand promises rather than specifics, so the printed legend and manual in the box are the real reference for what each light pattern means.
Who It’s For — and Who Should Skip It
This is a sensible spare for a toolbox, a glovebox kit for house hunting, or a first tester for someone who wants to confirm that kitchen, bath, garage and exterior GFCIs trip and reset. Skip it if you want a voltage reading, trip timing or open neutral detection that is clearly stated, where an LCD tester such as the Klein RT250 is the better match, or if you need AFCI testing.
Using It at Home
Use it on receptacles only, by plugging in and reading the lights against the chart on the tester.
- Plug it into each outlet and compare the light pattern to the printed legend.
- At GFCI outlets and the outlets they protect, press the test button and confirm power drops, then reset the GFCI.
- Note any outlet with a fault pattern, any GFCI that does not trip, and any that will not reset.
Front Range homes often have unfinished basements, garages and exterior outlets added over decades, and those are the spots where missing or worn-out GFCI protection tends to show up. Plug-in testers cannot detect every wiring problem, so a correct pattern is not a full clean bill of health. Do not open cover plates or rewire anything based on the result; any fault, failed trip or warm outlet needs a licensed electrician. Buyers can contact us to have outlets and GFCIs checked as part of a home inspection.
Pros
- Small and light for a pocket or kit
- Push-button GFCI trip test
- Nothing to configure
Cons
- Listing does not say which faults the seven modes detect
- No voltage, trip-current or warranty details
- No display or audible signal mentioned
Related Guides
- GFCI tester guide
- How to use a GFCI outlet tester
- GFCI outlet not working
- Electrical home inspection
As an Amazon Associate we earn from qualifying purchases. Product details come from the current Amazon listing; we have not lab-tested this unit, and prices and availability change.
$7.98 as of Nov 20, 2026 8:31 am GMT+0000
Prices change often — check the live price on Amazon. As an Amazon Associate we earn from qualifying purchases.



