Skip to content
Independent home-inspection guidance. We are not affiliated with the prior occupant of this domain.
Find an inspector

HVAC Inspector: What an HVAC Inspection Checks and Costs

By InspectandTest Editorial Team Published October 1, 2026 Updated November 13, 2026

We may earn commission from links on this page. Lead-form submissions are forwarded to local inspector partners. How we research and review.

Photo via Unsplash by Raze Solar

Heating and cooling equipment is easy to overlook during a home purchase. The furnace is tucked in a basement closet, the air conditioner hums outside, and as long as the house feels comfortable on showing day, most buyers move on. Yet a cracked heat exchanger, a failing compressor, or a disconnected flue can turn into a costly repair or a genuine safety hazard. An HVAC inspector looks past the thermostat to the condition, safety, and remaining life of the system. This guide explains what an HVAC inspection checks, how a home inspector’s review differs from a full evaluation by an HVAC contractor, what each typically costs, and when it is worth ordering. Carbon monoxide risk is a central theme, so we draw on EPA, CDC, and NFPA guidance throughout; anyone experiencing symptoms of carbon monoxide exposure should leave the home and seek medical help right away.

Heating or cooling trouble? Talk to a local HVAC technician.

📞 Call (833) 491-1876

Free, no-obligation quote · Connect with a local pro. Calls may connect you with a partner contractor; we may be compensated for calls.

What Does an HVAC Inspector Check?

An HVAC inspector evaluates the heating, ventilation, and air conditioning equipment in a home and reports on its operation, safety, and condition. A typical inspection covers the furnace or boiler, the heat exchanger, burners and ignition, the flue and venting, the air conditioner or heat pump, the ductwork and registers, the air filter, the thermostat, and the condensate drain. The inspector also notes the age of each major component, since age is one of the best predictors of upcoming replacement costs.

Who performs the inspection determines how deep it goes. A general home inspector performs a visual and operational check: does the system turn on, does it produce heat and cooling, are there visible defects or safety concerns. An HVAC contractor, often a NATE-certified technician, can go further by removing access panels, measuring combustion gases, testing refrigerant pressures, and evaluating the heat exchanger with cameras or other diagnostic tools. Both have a place, and the right choice depends on the age of the equipment and what the first inspection turns up.

Furnace and Heat Exchanger: The Carbon Monoxide Question

Most homes along the Colorado Front Range heat with natural-gas forced-air furnaces. That makes the furnace the most safety-critical item in any HVAC inspection.

Why heat exchangers matter

The heat exchanger is the metal chamber that separates burning gas from the air that circulates through the house. Combustion gases, including carbon monoxide, stay on one side and are vented outdoors through the flue. Household air passes over the other side and picks up heat. Over years of heating and cooling cycles, the metal can fatigue and crack, particularly in older furnaces or units that have been oversized, run with restricted airflow, or poorly maintained.

A crack does not always mean carbon monoxide is entering the living space, but it removes a layer of protection that the system was designed to have. Many manufacturers and contractors treat a confirmed crack as grounds to shut the furnace down and replace either the heat exchanger or the whole unit. On older furnaces, replacement of the whole unit is usually the practical choice.

What inspectors look for

  • Flame behavior. A burner flame that flickers, lifts, or changes when the blower starts can indicate air moving through a breach in the heat exchanger.
  • Rust, scaling, and soot. Corrosion around burners and the heat exchanger, or soot buildup, can signal combustion or venting problems.
  • Visible cracks. Some cracks can be seen with a flashlight and mirror; others require a camera inspection by a technician.
  • Combustion gas readings. A technician with a combustion analyzer can measure carbon monoxide in the flue gases and in the supply air.
  • Flue and venting. Proper slope, secure joints, adequate clearance from combustibles, an intact vent cap, and no disconnected sections.
  • Combustion air. Gas appliances in tight mechanical closets need an adequate supply of air to burn safely.

The EPA and CDC both stress that carbon monoxide is colorless and odorless, and that working CO alarms are the main household defense. An inspection does not replace alarms. Homes with fuel-burning appliances or attached garages should have CO alarms installed according to the manufacturer’s instructions and local code. Our overview of gas detectors for the home covers alarm types and placement.

Air Conditioners, Heat Pumps and Ductwork

Cooling equipment gets a separate set of checks. Because air conditioners can be damaged if run in cold weather, inspectors often limit testing when outdoor temperatures are low, and the report should say so.

Air conditioner and heat pump checks

  • Operation and temperature split. The difference between return-air and supply-air temperature gives a rough sense of whether the system is cooling effectively.
  • Outdoor condenser condition. Bent or clogged coil fins, damaged fan blades, a unit that is not level, and vegetation crowding the cabinet.
  • Refrigerant lines. Missing or deteriorated insulation on the suction line and signs of oily residue that can indicate leaks.
  • Electrical disconnect. A service disconnect within sight of the unit and correctly sized breakers.
  • Condensate drain. A clear drain line, a working pump where needed, and no water damage around the indoor coil.
  • Refrigerant type. Older systems may use R-22, which has been phased out of production in the United States. Servicing those systems can be expensive, which influences replacement planning.

Heat pumps are increasingly common in Colorado as homeowners electrify heating. A heat pump should be checked in both modes where the weather allows, along with the defrost function and any backup heat strips or dual-fuel furnace pairing.

Ducts, filters and indoor air

Ductwork distributes conditioned air and also affects efficiency and comfort. An inspector looks for disconnected or crushed ducts in attics and crawl spaces, missing insulation on ducts in unconditioned spaces, rooms without supply or return registers, and obvious leakage at joints. Filters tell a story too: a filter packed with dust suggests the system has not been maintained regularly. Dirty coils and damp drain pans can support microbial growth, a topic covered in our guide to HVAC mold inhibitors. The EPA’s guidance on duct cleaning notes that routine duct cleaning has not been shown to prevent health problems, but cleaning may be warranted in specific situations such as visible mold growth or vermin infestation.

Age and Life Expectancy of HVAC Equipment

Age is not a defect, but it is a strong signal for budgeting. The ranges below are general industry estimates; actual life depends on installation quality, maintenance, sizing, and use.

Equipment Typical service life (industry estimate) Notes
Gas furnace Roughly 15 to 25 years Heat exchanger condition matters more than age alone
Central air conditioner Roughly 12 to 17 years Hail and debris can shorten condenser life
Heat pump Roughly 10 to 16 years Runs year-round, so wear accumulates faster
Boiler Roughly 20 to 30 years Cast-iron units often outlast steel
Ductwork Often several decades Leaks and disconnections matter more than age
Thermostat Varies Easy and inexpensive to replace

Inspectors usually determine age from the manufacturer’s data plate, where the serial number often encodes the manufacture date. If the report lists a 20-year-old furnace and a 15-year-old air conditioner, a buyer can reasonably plan for replacement within the next several years even if both work on inspection day.

Home Inspector vs HVAC Contractor: Which Do You Need?

For most purchases, the process works in two steps. The home inspector performs the first look as part of the whole-house inspection. If the inspector finds a concern, or if the equipment is old, the buyer orders a detailed evaluation from an HVAC contractor.

Factor General home inspector HVAC contractor / NATE-certified tech
Scope Visual and operational, normal controls only Panels removed, components tested and measured
Heat exchanger Limited visual check where accessible Camera inspection, combustion analysis
Refrigerant Generally not tested Pressures and charge checked
Output Findings and referral for further evaluation Diagnosis, repair estimate, replacement quote
Conflict of interest Low, not selling repairs Possible, may sell equipment

NATE (North American Technician Excellence) certification is a widely recognized credential for HVAC technicians, covering areas such as gas heating, air conditioning, and heat pumps. It is not the only marker of competence, but it is a reasonable thing to ask about. HVAC contractors are also subject to licensing or registration requirements that vary by state and municipality, so check your state’s and city’s requirements and confirm the contractor pulls permits for replacement work where required.

Because a contractor may also sell new equipment, a recommendation to replace a working system deserves a second opinion. Ask the technician to document the findings with photos or combustion readings. For general guidance on vetting professionals, see our home inspector hiring hub and the step-by-step guide on how to hire a home inspector.

How Much Does an HVAC Inspection Cost?

Prices vary by market, number of systems, and the depth of the evaluation. These ranges are typical industry estimates.

  • HVAC review as part of a home inspection: included in the whole-house fee.
  • HVAC tune-up or maintenance visit: often roughly $80 to $200 per system, sometimes discounted in the off-season or bundled in a service plan.
  • Pre-purchase HVAC inspection by a contractor: often roughly $150 to $400, depending on the number of systems and whether combustion analysis and a written report are included.
  • Heat exchanger camera inspection: sometimes included, sometimes a separate charge.
  • Duct leakage testing: usually priced separately and often several hundred dollars, more common in energy audits than in purchase inspections.

Factors that change the price

Homes with two furnaces or zoned systems take longer. Equipment in tight attics or crawl spaces raises labor time. Boilers and radiant systems require different expertise than forced air. Mountain and rural properties may carry travel fees. Some contractors offer a low-priced inspection with the expectation of selling repairs, so compare what each quote includes rather than price alone.

Worked example

A buyer in Aurora is purchasing a 1998 ranch home. The home inspector notes the original furnace, rust on the burner assembly, and a flame that wavers when the blower starts, and recommends evaluation by an HVAC contractor. The buyer books a pre-purchase inspection for a few hundred dollars. The technician performs a camera inspection, confirms a crack in the heat exchanger, and red-tags the furnace. The 2009 air conditioner works but uses R-22. With two contractor quotes for a new furnace in hand, the buyer asks the seller for a repair credit within the inspection contingency window. The evaluation cost was a small fraction of the replacement cost, and it surfaced a safety issue before move-in.

When to Order an HVAC Inspection

  • Before buying a home with a furnace older than about 15 years, an air conditioner older than about 12 years, or any safety findings in the home inspection.
  • When the home inspector could not test cooling because of cold weather, or could not test heating on a hot day.
  • Before the first heating season in a newly purchased home, especially when maintenance records are missing.
  • When a CO alarm sounds, after you have left the home and the fire department or gas utility has made it safe.
  • When you notice warning signs such as soot around registers, a yellow or lazy burner flame, frequent cycling, unusual odors, or rooms that never reach temperature.
  • Before selling, so a buyer’s inspector does not surprise you with a heat exchanger finding during negotiations.

Buyers lining up specialty inspections often book the HVAC evaluation alongside a roof inspection and a sewer scope, so all findings arrive before the contingency deadline. Front Range buyers should also consider radon testing, since furnace operation and basement air pressure can influence indoor radon levels; our radon testing guide covers the basics.

Questions to ask an HVAC inspector

  1. Will you remove access panels and inspect the heat exchanger with a camera?
  2. Do you perform combustion analysis and measure carbon monoxide?
  3. Will you test cooling, and at what outdoor temperature do you stop?
  4. What certifications do your technicians hold?
  5. Will I get a written report with photos?
  6. Do you sell equipment, and will your report separate safety issues from upgrade recommendations?

How to Read an HVAC Inspection Report

HVAC findings tend to fall into four groups, and sorting them helps buyers decide what to negotiate and what to simply budget for.

  • Safety hazards. A cracked heat exchanger, high carbon monoxide readings, a disconnected or back-drafting flue, missing combustion air, or gas odors. These need action before the system is used, and they are reasonable items to ask a seller to repair or credit.
  • Functional defects. A failed inducer motor, a weak blower, an AC that does not cool, a clogged condensate line, or a refrigerant leak. These affect comfort and usually need a contractor’s estimate.
  • Maintenance items. Dirty filters, dusty burners, overdue service, or a dirty outdoor coil. Inexpensive to address, though a pattern of neglect is worth noting.
  • End-of-life notes. Equipment that works but is near or past typical service life. This is a budgeting item, not usually a repair request.

Read the limitations section carefully. If the inspector could not test cooling because the outdoor temperature was below the manufacturer’s threshold, or could not access the attic air handler, the report should say so. Those gaps are exactly where a follow-up HVAC contractor visit adds value.

Compare the HVAC findings with the rest of the report too. A water heater sharing a flue with the furnace, a damp crawl space where ducts run, or a bathroom fan that dumps moist air into the attic can all interact with the heating and cooling system. A roof and attic inspection often picks up duct and vent problems that a basement-only furnace check misses.

Keeping the System Healthy After You Move In

An HVAC inspection gives a snapshot. What happens over the next several years depends largely on maintenance. Most manufacturers recommend annual professional service, typically heating in the fall and cooling in the spring, and many warranties require it. Simple homeowner tasks also help:

  • Change or clean the air filter on the schedule the filter manufacturer recommends, more often during wildfire smoke events or construction dust.
  • Keep at least a couple of feet of clearance around the outdoor condenser and rinse debris from the coil gently.
  • Test CO alarms monthly and replace them at the end of their rated life.
  • Keep supply and return registers unblocked by furniture and rugs.
  • Watch for changes: new noises, short cycling, rising energy bills, or rooms that drift out of temperature.

Keeping the inspection report and service records together also pays off at resale, since buyers and their inspectors respond well to documented maintenance.

More Questions About HVAC Inspections

How long does an HVAC inspection take?

An HVAC inspection typically takes about 1 to 2 hours for a single system, and longer for homes with multiple furnaces, air conditioners or heat pumps, or if ductwork is evaluated in detail.

A basic tune-up visit focuses on cleaning and checking components and can be quicker. A pre-purchase inspection may involve more testing, such as combustion analysis or a camera look at the heat exchanger. Buyers should schedule early in the contingency period so any follow-up evaluation or repair quotes can be obtained before the deadline.

What is an HVAC inspection camera used for?

An HVAC inspection camera is a small borescope or video camera used to look inside furnaces, heat exchangers, flues and ducts without dismantling them. It helps technicians spot cracks, corrosion, debris, mold and disconnected duct sections.

Camera inspections are especially useful when evaluating a heat exchanger for cracks, which can be hard to see directly. Duct cameras can show buildup or damage in hidden runs. Findings often appear in reports as photos or video. A camera view complements, rather than replaces, combustion testing and carbon monoxide checks.

Does an HVAC inspection include checking for mold?

A standard HVAC inspection may note visible mold on coils, drain pans or inside the air handler, but it usually does not include mold sampling or testing. HVAC mold inspection is typically a separate, specialized service.

Signs worth mentioning to the technician include musty odors when the system runs, dark growth around supply vents and water around the indoor unit. If mold is suspected, an HVAC mold inspection or a mold inspector can sample affected surfaces. Fixing drainage and humidity problems is usually part of the solution.

Should you get an HVAC inspection before buying a house?

Yes, an HVAC inspection before buying a house is often worthwhile, especially if the system is older than about 10 to 15 years, the home inspector flagged concerns, or the furnace is gas-fired and its heat exchanger condition is uncertain.

A contractor can assess remaining life, safety issues and repair costs more deeply than a general home inspection. The findings support repair requests or price negotiation. Ask the seller for maintenance records, and confirm whether any warranty transfers. Replacing a full HVAC system can cost thousands, so a focused inspection is relatively cheap insurance.

References

Frequently asked questions

What does an HVAC inspector check?

An HVAC inspector checks the furnace or boiler, heat exchanger, burners, flue and venting, air conditioner or heat pump, ductwork, filters, thermostat, and condensate drain. The inspector also notes equipment age and flags safety issues such as carbon monoxide risk.

How much does an HVAC inspection cost?

A pre-purchase HVAC inspection by a contractor often costs roughly $150 to $400, while a routine tune-up often runs about $80 to $200 per system. Prices vary by market, number of systems, and whether combustion analysis and a written report are included.

Can a home inspector find a cracked heat exchanger?

A home inspector may spot warning signs such as rust, soot, or a flame that changes when the blower starts, but confirming a crack usually requires an HVAC technician with a camera and combustion analyzer. Inspectors typically refer these findings for further evaluation.

Is a cracked heat exchanger dangerous?

A cracked heat exchanger can allow combustion gases, including carbon monoxide, to mix with household air. Many contractors shut down a furnace with a confirmed crack. Working CO alarms are essential in any home with fuel-burning appliances.

How long does a furnace last?

Industry estimates commonly put gas furnace life at roughly 15 to 25 years, depending on installation, sizing, and maintenance. Heat exchanger condition and repair history matter more than age alone when deciding whether to replace.

How often should an HVAC system be inspected?

An HVAC system is commonly inspected once a year, with furnaces checked before the heating season and air conditioners or heat pumps before the cooling season. Heat pumps that run year-round often benefit from twice-yearly service. Regular inspection catches problems early.

Do HVAC inspectors need a license?

HVAC contractors who perform repairs and installations need a license in many states and localities, though requirements vary. Home inspectors who examine HVAC as part of a general inspection follow separate licensing rules. Ask any HVAC company for its license and insurance details.

What should an HVAC inspection report include?

An HVAC inspection report should include equipment age and model information, condition of major components, safety findings such as carbon monoxide readings or heat exchanger concerns, airflow or temperature measurements, photos of problems, and prioritized repair recommendations with rough cost guidance.

Shopping for a home along the Front Range and unsure about an aging furnace or air conditioner? Get in touch here to be connected with a qualified local inspector before your contingency window closes.