Home Warranty: What It Covers and How It Differs From Inspection
A home warranty shows up in a lot of real-estate transactions, often as a line item the seller pays for at closing. Many buyers sign the paperwork without knowing exactly what they are getting. A home warranty is a service contract: the buyer or homeowner pays an annual premium, and the provider agrees to repair or replace certain home systems and appliances when they fail from normal wear, subject to a service fee, coverage caps and a long list of exclusions. It is not homeowners insurance, and it is definitely not a substitute for a home inspection. This guide explains what these contracts typically cover, what they leave out, how claims work, and how buyers on the Front Range and elsewhere can evaluate one before relying on it.
Part of our Home Inspections Explained guide — start there for the full picture →
What Is a Home Warranty?
A home warranty is a renewable service contract, usually one year long, that covers the repair or replacement of specific home systems and appliances that break down from ordinary use. When something covered fails, the homeowner calls the provider, pays a set service-call fee, and the provider dispatches a contractor from its network. If the contractor determines the failure is covered, the provider pays for the repair or, in some cases, a replacement up to a dollar limit.
Three things it is not:
- Not insurance. Homeowners insurance covers sudden, accidental losses such as fire, hail or a burst pipe. A home warranty covers mechanical breakdown of aging equipment.
- Not an inspection. No one evaluates the house before the contract starts in most plans. The provider learns about the condition of a furnace only when a claim comes in.
- Not a manufacturer’s warranty. A new water heater may carry a manufacturer warranty on its tank. A home warranty is a separate third-party agreement.
The Federal Trade Commission groups home warranties with other service contracts, and its consumer guidance on extended warranties and service contracts offers a useful framework: read the contract, understand who backs it, and know exactly what is excluded before paying.
What a Home Warranty Typically Covers and Excludes
Coverage varies widely between contracts, so the lists below describe common patterns rather than any specific plan.
Commonly covered systems
- Heating systems, including furnaces and boilers
- Central air conditioning (sometimes an add-on)
- Interior plumbing lines, drain stoppages and water heaters
- Interior electrical wiring and panels
- Ductwork, sometimes with limits
Commonly covered appliances
- Kitchen refrigerator, range, oven and cooktop
- Dishwasher, built-in microwave and garbage disposal
- Clothes washer and dryer (often an add-on)
Frequent optional add-ons
Pools and spas, well pumps, septic systems, second refrigerators, and roof leak repair are often sold as extra-cost options. Buyers of rural properties in Elbert or Douglas County, where wells and septic systems are common, should check these line items carefully rather than assuming they are included.
Common exclusions
Exclusions are where most disputes start. Typical contract language excludes:
- Pre-existing conditions. Failures that began before the contract start date, whether or not anyone knew about them. Some contracts cover unknown pre-existing conditions if the item was working at the start; many do not.
- Improper maintenance. A furnace that fails with a clogged filter or a water heater full of sediment may be denied.
- Code upgrades and permits. If a repair requires bringing equipment up to current code, the extra cost often falls on the homeowner.
- Access and removal costs. Cutting drywall, removing cabinets, or hauling away old equipment may not be covered.
- Cosmetic defects and secondary damage, such as water damage to flooring caused by a failed dishwasher.
- Specific components listed in the fine print, which can include certain heat exchangers, refrigerant, or ductwork in inaccessible locations.
Coverage caps
Most contracts limit what the provider will pay per item, per claim, or per contract term. A plan might cap HVAC replacement at a figure well below the actual cost of a new furnace and air conditioner in the Denver market. The homeowner then pays the difference. Caps are one of the most important numbers in the contract and one of the least read.
Service-Call Fees and How Claims Work
Every claim usually starts with a service-call fee, sometimes called a trade call fee or deductible. Industry estimates put typical fees in a range of roughly $75 to $150 per visit, though contracts vary. The fee is generally owed even if the claim is denied.
A typical claim follows these steps:
- File the claim by phone or online, describing the failure.
- Provider assigns a contractor from its network. Homeowners usually cannot choose their own contractor without prior approval.
- Contractor diagnoses the problem and reports to the provider whether it appears covered.
- Provider approves or denies the claim based on the contract. If approved, it authorizes repair or offers a replacement or cash-out up to the cap.
- Repair is scheduled, which may take days if parts are back-ordered or contractors are busy, such as during a January cold snap.
Delays and denials are the most common complaints. A furnace that fails in the middle of a Front Range winter can leave a household waiting while the provider and contractor work through approvals. Homeowners should understand the contract’s stated response times and what happens if no network contractor is available.
Seller-Paid Home Warranties in Real-Estate Deals
In many markets, a home warranty is offered by the seller as a concession, either to make the listing more attractive or as part of the inspection negotiation. In Colorado transactions, it is common to see a home warranty mentioned in the contract as a seller-paid item, with the cost settled at closing.
Seller-paid coverage has a few practical features buyers should know:
- The coverage typically starts at closing and runs one year. Renewals are at the buyer’s expense.
- Some listing-period plans cover the seller while the home is on the market, then transfer to the buyer.
- A seller-paid warranty is not a substitute for repairing a known defect. If the inspection reveals a cracked heat exchanger, a warranty that excludes pre-existing conditions is unlikely to pay for it.
That last point is the one that most often surprises buyers. Accepting a home warranty in place of a repair credit can leave the buyer with a denied claim and the full replacement bill. When the inspection identifies a specific defect, a repair, a credit, or a price reduction is usually a more direct remedy. Buyers who are still choosing an inspector can find guidance in our buyer’s guide to hiring a home inspector.
Home Warranty vs Homeowners Insurance vs Home Inspection
These three products are often confused because they all relate to the condition of a house. They do different jobs.
| Feature | Home warranty | Homeowners insurance | Home inspection |
|---|---|---|---|
| What it is | Service contract for systems and appliances | Insurance policy against sudden losses | Professional visual evaluation of a home’s condition |
| What triggers it | Mechanical breakdown from normal wear | Covered perils such as fire, wind, hail, theft, sudden water damage | A purchase, sale, or owner’s request |
| Typical cost structure | Annual premium plus per-claim service fee | Annual premium plus deductible | One-time fee |
| Required? | Optional | Usually required by mortgage lenders | Optional but strongly recommended |
| Covers pre-existing defects? | Usually not | No; covers new sudden losses | Identifies them before purchase |
| Main value | Budget smoothing for repairs | Protection from large catastrophic losses | Information to negotiate or walk away |
A home inspection comes first in the sequence because it gives buyers information while they still have options. The standards of practice published by the American Society of Home Inspectors describe what a general inspection covers, and the systems they list overlap heavily with what a home warranty insures. A thorough full home inspection can tell a buyer that the furnace is 22 years old and showing rust, which is exactly the kind of item a warranty may later refuse as pre-existing. For background on how inspections work and what to expect on inspection day, see the home inspection basics hub.
How to Evaluate a Home Warranty Plan
Because the contract is the product, evaluating a home warranty is mostly a reading exercise. The FTC’s general guidance on warranties stresses getting the terms in writing and understanding them before buying, and that advice applies directly here.
A practical checklist:
- Read the full contract, not the brochure. The sample contract should be available before purchase. Marketing pages describe coverage in broad terms; the contract defines it.
- Find the caps. Look for per-item, per-system and aggregate limits. Compare the HVAC cap to what a replacement actually costs locally.
- Read the exclusions section twice. Note how the contract handles pre-existing conditions, maintenance requirements, code upgrades and access costs.
- Check the service fee and whether it applies per visit or per claim. Multiple visits for one problem can add up.
- Understand the contractor rules. Can the homeowner use their own contractor? What is the stated response time? What happens in an emergency?
- Review cancellation and renewal terms. Note any automatic renewal and the refund policy.
- Look at complaint history. State consumer protection offices, the state attorney general and the Better Business Bureau collect complaints. Patterns of claim denials or delays are a meaningful signal.
- Confirm who regulates it. Some states regulate home service contracts through the insurance department. Homeowners can check with their state regulator to see whether the provider is registered.
Keep records of maintenance, such as furnace servicing and water heater flushing. If a claim is denied for lack of maintenance, receipts are the strongest response.
Specialty systems deserve particular attention. A home warranty that covers “plumbing” may not cover a sewer line outside the foundation, a well pump, or a septic tank, and a plan that covers “heating” may exclude a boiler’s radiant tubing or a geothermal loop. Buyers who are relying on these systems often order separate evaluations, such as a sewer scope or a septic inspection, during the inspection period. The specialty inspections hub explains which add-on inspections fit which property types. Those reports give a far clearer picture of condition than any service contract can, and they arrive while the buyer can still negotiate.
Roofs are another common gap. Many plans exclude the roof entirely or cover only minor leak repair on certain roof types, which matters in hail-prone parts of Colorado where roof damage is generally an insurance matter rather than a warranty claim.
How Much Does a Home Warranty Cost?
Pricing depends on the plan tier, home size, location and add-ons. The ranges below are general industry estimates for planning purposes only. Actual quotes vary, and Front Range pricing may differ from national figures.
| Cost element | Typical range (estimate) | What drives it |
|---|---|---|
| Annual premium, basic systems or appliances plan | Roughly $350 to $600 per year | Fewer covered items, lower caps |
| Annual premium, combined systems and appliances plan | Roughly $500 to $900+ per year | Broader coverage, higher caps |
| Optional add-ons | Often tens of dollars each per year | Pools, wells, septic, second refrigerator, roof leaks |
| Service-call fee per claim | Roughly $75 to $150 | Chosen at purchase; lower fee usually means higher premium |
| Out-of-pocket above caps | Varies widely | Difference between contract cap and actual replacement cost |
Total cost of ownership is the premium plus every service fee plus any amount above the caps. A household that files four claims in a year pays four service fees on top of the premium. Running that math with realistic assumptions, such as one HVAC call, one plumbing call and one appliance call per year, gives a clearer picture than comparing premiums alone.
Multi-year contracts and monthly payment plans are also common. Monthly billing can make a plan feel inexpensive, but the annual total is what matters, along with any cancellation fee if the homeowner decides the coverage is not worth keeping.
Getting the Most From a Claim
Homeowners who decide to buy or accept a home warranty can take a few steps to reduce the chance of a denial or delay.
Document condition at the start
Keep a copy of the home inspection report and take dated photos of major equipment, including data plates showing model numbers and ages. If the provider later claims a failure was pre-existing, evidence that the unit was working at closing can help. Some buyers also keep the seller’s disclosure and any service records the seller provided.
Keep up with maintenance
Change furnace filters on schedule, have the furnace and air conditioner serviced, flush the water heater as the manufacturer recommends, and keep receipts. Maintenance exclusions are among the most common reasons for denial, and documentation is the best defense.
Report problems early
Many contracts require prompt reporting. A small leak that turns into a large one because it was ignored may lead to a dispute over whether the damage was caused by neglect.
Ask for the denial in writing
If a claim is denied, request the specific contract language relied on and the contractor’s diagnostic notes. That makes an appeal more focused. If the dispute cannot be resolved, a complaint to the state consumer protection office or insurance regulator is an option, and the FTC accepts reports of unfair business practices.
Is a Home Warranty Worth It?
There is no single answer. The value depends on the age of the home’s systems, the homeowner’s savings cushion, and the terms of the specific contract.
Situations where it can make sense
- The seller is paying for the first year, so the buyer’s cost is mainly service fees.
- The home has several mid-life appliances and systems, and the buyer has limited cash reserves right after closing.
- The homeowner values having a single phone number to call over finding and vetting contractors.
Situations where it may not
- The systems are new and still under manufacturer warranty.
- The systems are very old and likely to be denied as pre-existing or for lack of maintenance history.
- The homeowner has an emergency repair fund and prefers to choose contractors directly.
- Coverage caps are low relative to local replacement costs.
Some homeowners take a middle path: set aside the equivalent of an annual premium in a dedicated repair fund each year. Over several years, that fund may cover the same repairs without exclusions or service fees, although it offers no protection against an early, expensive failure. Either way, the decision is best made after an inspection, not before, because the inspection report shows which systems are near the end of their service life.
More Questions About Home Warranties
Can you buy a home warranty at any time?
Yes, most home warranty companies let homeowners buy a plan at any time, not only at a home purchase. Plans bought outside a real estate closing usually include a waiting period, often around 30 days, before claims can be filed.
The waiting period prevents buying coverage for a system that has already failed. Some companies inspect or limit coverage for known pre-existing problems. Buyers who purchase a plan at closing often have the waiting period waived. Reading the start date and exclusions before signing helps avoid a denied first claim.
Can you cancel a home warranty?
Yes, most home warranties can be canceled, though the terms vary by company and state. Cancellations within a short initial window, often 30 days, may get a full refund minus any claims paid.
After that, refunds are usually prorated, and many companies deduct a cancellation fee and the cost of service already provided. Monthly plans may simply stop at the end of the billing cycle. The cancellation policy should be read before buying, and cancellations are best made in writing with a confirmation number.
Does a home warranty cover pre-existing conditions?
Most home warranties exclude pre-existing conditions, meaning problems that existed before coverage began. That exclusion is one of the most common reasons claims are denied.
Some plans cover pre-existing conditions that could not be detected by a visual inspection, while others exclude them entirely. Keeping a copy of the home inspection report and maintenance records helps show that a system was working at the start. When a claim is denied for a pre-existing condition, ask for the technician’s findings in writing and review the contract language.
Is a home warranty transferable when selling a house?
Many home warranties are transferable to a new owner when a house is sold, sometimes for a small fee. A transferable plan can be a selling point, since the buyer gets coverage for the remainder of the term.
Transfer rules vary, so the seller should check the contract and notify the warranty company with the new owner’s information. Sellers can also buy a new plan for the buyer at closing as a concession. Some listing-period plans cover the seller while the house is on the market.
References
- Extended Warranties and Service Contracts — Federal Trade Commission Consumer Advice
- Warranties — Federal Trade Commission Consumer Advice
- ASHI Standard of Practice for Home Inspections — American Society of Home Inspectors
Frequently asked questions
Is a home warranty the same as homeowners insurance?
No. Homeowners insurance covers sudden, accidental losses such as fire, hail or theft, and lenders usually require it. A home warranty is an optional service contract that covers mechanical breakdown of systems and appliances from normal wear, subject to service fees, caps and exclusions.
Does a home warranty replace a home inspection?
No. A home inspection identifies existing defects before purchase, while most home warranties exclude pre-existing conditions. Relying on a warranty instead of an inspection can leave a buyer paying for problems the contract refuses to cover.
What does a home warranty usually not cover?
Common exclusions include pre-existing conditions, failures from improper maintenance, code upgrades, access and removal costs, cosmetic defects and secondary damage. Pools, wells, septic systems and some appliances are often optional add-ons. The contract's exclusions section is the authoritative list.
How much is a home warranty service call fee?
Service-call fees are commonly in a range of roughly $75 to $150 per visit, depending on the contract. The fee is usually owed even if the claim is denied. Check whether the fee applies per visit or per claim.
Should a buyer accept a home warranty instead of a repair credit?
Usually not for a defect the inspection already found. Because most contracts exclude pre-existing conditions, a known problem may not be covered. A repair, credit or price reduction is generally a more direct remedy for documented defects.
Does a home warranty cover roof leaks?
Most home warranties do not cover roof leaks in the base plan, and limited roof leak coverage is often an add-on. Even then, coverage usually applies only to minor repairs of the main roof, excluding replacement and storm damage handled by insurance.
Do home warranties cover appliances bought after the plan starts?
Many home warranties cover appliances added after the plan starts, as long as they are listed covered appliance types and in working order. Some companies require notice or registration. Check the contract to confirm coverage for new appliances.
Can you choose your own contractor with a home warranty?
Most home warranties require using the company's network contractor. Some allow outside contractors with prior approval and reimbursement up to a limit. Hiring an outside contractor without approval usually means the claim will not be paid.
Want an independent look at a home’s systems before deciding whether a warranty is worth it? Front Range buyers can get in touch here to be connected with a qualified local inspector.